CHAMPION 5 Ton Heat-Pump / Air Handler 19 SEER

$8,278.00 Complete system with installation (TAX included)
Pay after installation

Matched heat-pump system with the best ratio of efficiency and price. Two-stage compressor minimizes electricity consumption and keeps precision temperature. Electronically commutated blower motor for quiet operation and constant airflow. Certificate AHRI 9036087, Actual SEER 16

Out of stock

SKU: 50HL19AEEHTXV
Category:

Description

Heat-Pump CHAMPION HL19B6021S – HL19 series 19 SEER Two Stage
– Two Stage Protected Scroll Compressor
– Suction Accumulator protects the compressor from liquid flood back Factory installed compressor sound blanket
– Advanced System Control – proprietary Wi-Fi Hx™ thermostat interface allows monitoring and adjustment of system from a smart device
– factory installed compressor crank case heater warms compressor sump

Air Handler Unit CHAMPION AE60CX22 – AE series
– MaxAlloy™ Coil
– 100% leak tested
– Bolt-on TXV
– Thermoset Drain Pan positive slope for drainage to reduce mold and contaminants

Electric Heater CHAMPION S1-6HK16502006 – Heat Strip Electric heater 20 KW

Thermostat

Communicating thermostat is not required. Can be used existing one if it fits to a new system requirement.

Warranty on equipment/works – according to manufacturer’s/contractor’s term and conditions.

Champion Extended Limited Warranty:
– 10 years on coil and functional parts
– 10 years on compressor

Warranty on installation works – 12 month

All necessary materials that must be replaced to keep your new AC system running efficiently and safety and to pass a city inspection

Service works:
– City Permit

Professional installation works in accordance with mechanical city code:
– Remove and recycle existing equipment, cleanup site when finished
– Customer flooring protected with drop clothes
– Existing refrigerant recovered and recycled in accordance with the clean air act
– Installation of new system units
– Exterior section of refrigerant line insulation replaced with exterior-grade pipe insulation
– Copper refrigerant lines vacuumed and filter drier installed to prevent moisture damage
– Connecting to existing ductwork
– all necessary connection to existing communication lines (electricity, gas and flue pipe)
– Thermostat wiring connection
– Condensate line connection to existing drainage with proper P-trap and cleaning access
– All seams between equipment, platform and ductwork sealed airtight
– Adjust refrigerant charge and blower speed to provide optimal performance

AHU type: Upflow/Horizontal

Condenser unit location: Ground

Flow direction location: Upflow

Heat source: Electric

HP / AC: Heat-Pump

Tonnage: 5